Enhancing the performance of ceramic bricks using aluminium dross and waste glass as sustainable additives
Document Type
Article
Publication Date
5-1-2026
Abstract
Incorporating solid waste into the production of sintered ceramic bricks (SCBs) offers a sustainable approach that mitigates the environmental impact of landfill disposal while simultaneously enhancing the performance of the bricks. Secondary aluminium dross (SAD) is an industrial waste characterised by a high content of hazardous components. However, after thermal pre-treatment, these components are eliminated and the treated SAD (T-SAD) is rich in corundum (Al2O3) and spinel (MgAl2O4), thus having the potential to enhance the mechanical strength of SCBs. Furthermore, waste glass (WG) can be introduced as a fluxing additive due to its high glassy phase contents and fluxing components, which promotes the liquid phase formation during the sintering process, thus enhancing the performance of SCBs. This research investigated the effect of various WG contents (0-40%) and sintering temperatures (900-1000 °C) on the performance of SCBs with SAD. During the sintering process, the produced Na+ and Ca2+ ions from WG diffuse into the aluminosilicate, facilitating the formation of feldspathic phases of albite (NaAlSi3O8) and anorthite (CaAl2Si2O8) that contribute to the formation of the liquid phase. The optimal SCBs were achieved with 10% WG and sintered at 1000 °C for 4 h, exhibiting the highest compressive strength of 47.4 MPa, a bulk density of 1848 kg/m3, and a water absorption of 12.6%. These results met the requirements for Grade Severe Weathering according to ASTM C62-17 (compressive strength >20.7 MPa, water absorption < 17%). The findings confirm the feasibility of partially replacing clay with T-SAD and incorporating WG to develop SCBs with satisfactory performance.
Keywords
Aluminium dross, Ceramics materials, Fluxing additive, Sintered ceramic brick, Waste glass
Publication Title
Ceramics International
ISSN
02728842
DOI
10.1016/j.ceramint.2026.02.320
Recommended Citation
Huang, Xinghan; Cheng, Yit Heng; Zhang, Fengyi; Onn, Chiu Chuen; Lim, Ying Pio; Lim, Heng Kam; Tan, Chou Yong; and Mo, Kim Hung, "Enhancing the performance of ceramic bricks using aluminium dross and waste glass as sustainable additives" (2026). Research Publications (2026 to 2030). 688.
https://knova.um.edu.my/research_publications_2026_2030/688
Volume
52
Issue
11
First Page
17339
Last Page
17347