Sintered artificial aggregates using aluminium dross and waste glass: insights into strength, microstructure and interfacial transition zone of lightweight aggregate concrete

Document Type

Article

Publication Date

2-15-2026

Abstract

This study investigates the feasibility of producing clay-based lightweight sintered artificial aggregates (SAAs) using heated secondary aluminium dross (H-SAD) and waste glass (WG), aiming to serve as coarse aggregates in fabricating lightweight aggregate concrete (LWAC). SAAs were produced at a fixed clay to H-SAD ratio of 60:40, with varying WG contents (0–40%) and sintered at different temperatures (1150–1250 °C). The results showed that appropriate WG incorporation promoted liquid phase sintering (LPS), significantly improving the overall performance of SAAs. However, excessive WG addition (40%) led to the formation of NaAlSi3O8 and CaAl2Si2O8, which consumed Al2O3 and negatively affected the performance of SAAs. Among these samples, SAAs with 20% WG and sintered at 1250 °C were selected for the production of LWAC, as they exhibited the lowest bulk density of 516 kg/m3, a crushing strength of 3.2 MPa, and a water absorption of 3.6%. Moreover, these aggregates effectively stabilised the heavy metals from waste, confirming their environmental safety. The produced LWAC achieved a 28 days compressive strength of 39.2 MPa and a density of 1884 kg/m3, meeting lightweight concrete standards. Microstructural analysis revealed improved interfacial transition zone performance in LWAC incorporating SAAs compared with that containing commercial lightweight aggregates. This was attributed to the rough surface texture of SAAs, which enhanced mechanical interlocking and facilitated the penetration of cement matrix and hydration products into the surface pores of the aggregates. This study thus presents a sustainable and effective approach in fabricating LWAC using industrial waste materials.

Keywords

Aluminium dross, Interfacial transition zone, Lightweight aggregate, Lightweight aggregate concrete, Waste glass

Publication Title

Journal of Building Engineering

ISSN

2352-7102

DOI

10.1016/j.jobe.2026.115468

Funders

PMB Aluminium Sdn Bhd (PV008-2023), China Scholarship Council (202310710014)

Volume

120

Publisher

Elsevier Ltd

Share

COinS