Impact of 4-Hour Ball Milling and Calcination Temperature (800 °C – 1000 °C) on the Morphology, Crystallinity, and Phase Composition of Chicken Bone-Derived Hydroxyapatite for Biomedical Application
Document Type
Article
Publication Date
2-1-2026
Abstract
This study investigates the effects of 4-hour ball milling and varying calcination temperatures (800-1000 °C) on the physicochemical properties of hydroxyapatite (HA) powder derived from chicken bone waste. The research focuses on crystalline, morphology, and phase composition, while mechanical and biological evaluations are excluded from the scope. Although biowaste-derived HA offers trace element benefits, its inconsistent crystallinity, phase purity, and particle agglomeration hinder biomedical use. Previous studies have examined individual synthesis parameters, but the combined impact of mechanical and thermal treatments remains underexplored. To address this gap, HA was processed through cleaning, pulverisation, and calcination at 800, 900, and 1000 °C for 2 hours. These calcination temperatures were selected based on the thermal decomposition profile observed via thermogravimetric analysis (TGA). The calcined powders were then crushed, sieved, and subjected to a 4-hour ball milling process. This study integrates both ball milling and calcination to assess their combined impact on crystallinity, morphology, surface area, and phase composition of HA, key parameters for bone tissue engineering, load-bearing implants, and drug delivery. Fourier Transform Infrared Spectroscopy (FTIR) results confirmed the removal of organic materials at all three calcination temperatures. X-ray Diffraction (XRD) with Lorentz-corrected crystallinity evaluation showed increased crystallinity with higher calcination temperatures, obtaining 49.84% at 800 °C, 59.4% at 900 °C, and 60.2% at 1000 °C, while ball milling slightly reduced crystallinity. Specifically, the morphology of the powders improved with ball milling, resulting in reduced agglomeration and powder size by approximately 38% via Scanning Electron Microscopy with Energy Dispersive X-ray Analysis (SEM-EDX). The Ca/P ratios of powders calcined at 800 and 900 °C ranged from 1.53 to 1.58, which is close to that of natural human bone. The surface area increased from 6.8 to 10.98 m2/g after ball milling from Brunauer-Emmett-Teller (BET) analysis, enhancing load-bearing potential. Moreover, the presence of β-tricalcium phosphate (β-TCP) phases contributes to tunable resorption, making the material promising for bioresorbable scaffolds in orthopaedic and maxillofacial applications. These results provide a foundation for the development of sustainable, biowaste-derived HA materials for future biomedical applications.
Keywords
Ball milling, BET surface area, Bone tissue engineering, Chicken bone-derived hydroxyapatite, XRD crystallinity
Publication Title
Journal of Engineering Science and Technology
ISSN
1823-4690
DOI
jestec.taylors.edu.my/Vol%2021%20Issue%201%20February%202026/21_1_10.pdf
Recommended Citation
Yap, J. H.; Lee, K. Y.Sara; Ng, C. K.; Ong, T. K.; Ting, C. H.; and Ramesh, S., "Impact of 4-Hour Ball Milling and Calcination Temperature (800 °C – 1000 °C) on the Morphology, Crystallinity, and Phase Composition of Chicken Bone-Derived Hydroxyapatite for Biomedical Application" (2026). Research Publications (2026 to 2030). 1323.
https://knova.um.edu.my/research_publications_2026_2030/1323
Funders
Tunku Abdul Rahman University of Management and Technology (UC/I/G2022-00101)
Volume
21
Issue
1
First Page
166
Last Page
180
Publisher
Taylor's University