Impact of Calcination and Sintering on the Densification and Hardness of Chicken Bone-Derived Hydroxyapatite for Biomedical Applications

Document Type

Article

Publication Date

2-1-2026

Abstract

This current research explored how two-step thermal treatment (calcination and sintering) impacts the densification of hydroxyapatite (HA) synthesised from chicken bone waste. Although prior studies have highlighted the benefits of thermal treatment on the densification and mechanical properties of hydroxyapatite (HA), most have focused on a fixed calcination or sintering temperature, typically around 1250 °C or 1300 °C, and primarily using synthetic HA. This narrow focus limits the understanding of the combined effects of both thermal steps, particularly in HA derived from bone waste, where calcination plays a critical role in removing organic components. The present study investigates the interaction between calcination and sintering temperatures to assess their combined influence on phase stability and mechanical performance, offering new insights into the thermal processing of biowaste-derived HA. The HA powders were subjected to calcination at 800, 900, and 1000 °C, then compacted and sintered at 1200, 1250, 1300, and 1350 °C. The phase composition and microstructure of the samples were analysed using X-ray diffraction (XRD; with RIR and Lorentz correction) and scanning electron microscopy. Mechanical characterisation included linear shrinkage analysis, densification measurements, and Vickers hardness testing. Statistical analysis using ANOVA test confirmed that sintering temperature had a significantly greater influence on hardness than calcination temperature (p < 0.001), with interaction effects also being significant. The current study suggests that calcination at 900 °C and sintering at 1250 °C is the optimal combination, producing a relative density of about 98%, a Vickers hardness of 4.97 GPa, and a crystallinity of 61.2%. Grain coarsening up to 12 µm at 1350 °C corresponded to decreased hardness (~4.5 GPa) and increased βTCP formation, as revealed by XRD. Overall, this study demonstrates the viability of chicken bone waste as a sustainable precursor for fabricating high-density HA ceramics, tailored for load-bearing biomedical applications such as bone grafts and orthopaedic implants, where mechanical strength and phase stability are critical.

Keywords

Calcination temperatures, Chicken bone-derived hydroxyapatite, Densification, Load-bearing applications, Vickers hardness

Publication Title

Journal of Engineering Science and Technology

ISSN

1823-4690

DOI

jestec.taylors.edu.my/Vol%2021%20Issue%201%20February%202026/21_1_12.pdf

Funders

Tunku Abdul Rahman University of Management and Technology (UC/I/G2022-00101)

Volume

21

Issue

1

First Page

199

Last Page

216

Publisher

Taylor's University

Share

COinS