Generation of high-power Q-switched pulses based on arc-shaped fiber and tapered fiber with Sb2Te3 in erbium/ytterbium doped fiber laser
Document Type
Article
Publication Date
3-1-2023
Abstract
This study illustrates the capability of antimony telluride (Sb2Te3) utilized as a saturable absorber (SA) for generating high-power Q-switching in the 1.5-mu m region. First, the exfoliated Sb2Te3 solution was fabricated using the liquid phase exfoliation (LPE) technique and integrated onto a D-shaped and tapered fiber, respectively. Then, the SA was inserted into the erbium-ytterbium-doped fiber laser (EYDFL) cavity. For the arc-shaped fiber-based SA, the passive Q-switched pulses were obtained at 1.34 W threshold pump power, whereas the tapered fiber-based SA has a threshold of 0.4 W. As a result, the highest average Q-switched optical power generated by Sb2Te3-coated arc-shaped fiber was 140.2 mW with a repetition rate ranging from 35.7 to 91.3 kHz and pulse widths from 2.51 to 1.65 mu s. On the other hand, the tapered fiber coated with Sb2Te3 could only generate a maximum average output power of 21.7 mW. Moreover, this SA generates Q-switched pulses with a repetition rate ranging from 5.76 kHz to 39.2 kHz and a pulse width from 5.14 to 16.34 mu s. This indicates that Sb2Te3 can serve its purpose as an SA to produce high-power Q-switched pulses without degradation.
Keywords
Erbium, ytterbium, Arc-shaped fiber, Tapered fiber, Antimony telluride, Q-switching
Divisions
PHYSICS,photonics
Funders
Ministry of Higher Education, Malaysia [Grant No: PRC-2014],Universiti Malaya [Grant No: RK021-2019, RU005-2021]
Publication Title
Infrared Physics & Technology
Volume
129
Publisher
Elsevier
Publisher Location
RADARWEG 29, 1043 NX AMSTERDAM, NETHERLANDS