Effect of infill parameters on the compressive strength of 3d-printed nylon-based material
Document Type
Article
Publication Date
1-1-2023
Abstract
3D printing is the most suitable method to manufacture the frame parts of powered ankle-foot prostheses but the compressive strength of the 3D-printed part needs to be ensured. According to the compression test standard ASTM D695, the effect of infill pattern and density, which is transferred to the mass of the standard specimen, on the compressive strength is investigated with a carbon fiber-reinforced nylon material. With the same infill pattern, specimens with more mass have a higher compressive strength. With the same mass, specimens with triangular fill have a higher compressive strength than those with rectangular and gyroid fills. Compared with specimens with a solid fill, specimens with a triangular fill can also provide more compressive strength in a unit mass. According to the results of standard specimens, following the requirement of strength and lightweight, 41% triangular fill is selected to manufacture the supporting part of a powered ankle-foot prosthesis. Under a compressive load of 1225 N, the strain of the assembly of the standard adaptor and the 3D-printed part is 1.32 +/- 0.04%, which can meet the requirement of the design. This study can provide evidence for other 3D-printed applications with the requirement of compressive strength.
Keywords
3D print, FDM, carbon fiber-reinforced nylon, compressive strength, infill pattern, infill density, powered ankle-foot prosthesis
Divisions
biomedengine
Funders
Ministry of Energy, Science, Technology, Environment and Climate Change (MESTECC), Malaysia NTIS 098773
Publication Title
Polymers
Volume
15
Issue
2
Publisher
MDPI
Publisher Location
ST ALBAN-ANLAGE 66, CH-4052 BASEL, SWITZERLAND