Date of Award

2-20-2026

Thesis Type

PhD

Document Type

Thesis

Degree Name

Doctor of Philosophy (PhD)

Divisions

Institute for Advanced Studies

Institution

Universiti Malaya

Abstract

Sun is the most resourceful source of energy in the world and have the highest technical potential to meet the current and future energy demands in sustainable manner. Efficient harnessing and storing of this incoming energy could contribute to achieving sustainable development goals. Engineered green materials aims for material circularity and reduction in waste byproducts by generating functional sustainable materials. Carbon nanomaterials have been reported for their enhanced properties. Thereby, in this investigation two samples of green engineered carbon nanomaterials were synthesized from lignocellulosic waste sources for efficiency enhancement of solar thermal collector. Three-part acid free method was devised for the synthesis and functionalization of nanomaterials followed by two-step synthesis method of nanofluid. The nanoparticles were synthesized from green waste (coconut husks and pine cones) and were less than 100 nanometers and having desired functional group and porosity. After thorough characterizations of nanomaterials, water based nanofluids were prepared in 0.05, 0.1 and 0.15 wt.% concentration and their thermophysical behaviors were analyzed. Enhanced thermal properties and stability was observed for the synthesized nanofluids. Further, the synthesized nanofluid sampled were investigated in the solar thermal collector setup following various inlet temperatures (30, 35, 40, 45 ℃), flow rates (0.56, 0.84, 1.1, 1.4 L/m) and heat fluxes (700, 800, 900, 1000 W/m2) to evaluate the performance of the solar thermal collector with the application of the novel synthesized nanofluids. On the other hand, this investigation also examines the economic and environmental impact of the synthesized nanofluids in the solar collector. The increase in 𝐹𝑅(πœπ›Ό) for both the synthesized nanofluids at 0.15 wt.% and 1.4 L/min was around 30% compared with the base fluid and the maximum solar collector size reduction was noted to be more than 25%, leading to the maximum payback period to around 2.4 years. Moreover, reduction in embodied energy due to the application of nanofluids was observed to be 200 MJ compared to that of water. Also, the total reduction of damage cost in terms of environment is estimated to be more than 100 $/kg. That is, the synthesized nanofluids were not only found to be suitable for thermal efficiency enhancement but also more economical than commercially available options and have minimal environmental impact, suggesting them as highly suitable for thermal efficiency enhancement of solar collector.

Initial

khm

Additional Information

Dissertation (M.A.) – Institute for Advanced Studies, Universiti Malaya, 2026.

Available for download on Wednesday, March 01, 2028

Share

COinS