Date of Award
9-2010
Thesis Type
Masters
Document Type
Dissertation
Divisions
Faculty of Engineering
Institution
Universiti Malaya
Abstract
This thesis presents the development of a micro-diaphragm for an optical pulse pressure sensor using Micro-electro-mechanical Systems (MEMS) technology. Modelling of the micro-diaphragm was conducted and the comparison of its performance was simulated for silicon nitride and polyirnide materials. In addition. diaphragm's radius and thickness were varied to further analyze the performance of the micro-diaphragm. There are three design parameters that affecting the micro-diaphragm performance namely diaphragms radius. thickness and material. Thus, an optimization analysis using Taguchi method was done to attain significant design parameters that give the best micro-diaphragm performance. Findings indicated that the best performance of the micro-diaphragm was obtained when the micro-diaphragm achieved high deflection and sensitivity as well as low resonance frequency. Simulation results have concluded that these performances are achieved when the diaphragm's radius and thickness are large and small respectively. Furthermore, the Taguchi method verified that the optimized design parameters radius of 90~-tm, thickness of 4~-tm and polyimide material have successfully achieved the best micro-diaphragm performance. In addition, the selected design parameters have been proven to provide an adequate sensitivity to detect the pulse pressure on human's radial artery.
Additional Information
Dissertation (M.A.) – Faculty of Engineering, Universiti Malaya, 2010.
Recommended Citation
Hasikin, Khairunnisa, "Modeling of micro-diaphragm for optical pressure sensor for human artery pulse wave detection." (2010). Student Works (2010-2019). 401.
https://knova.um.edu.my/student_works_2010s/401
Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-No Derivative Works 4.0 International License.
Included in
Biomedical Engineering and Bioengineering Commons, Electrical and Computer Engineering Commons, Mechanical Engineering Commons
Initial
khm