Screen-Printed Organic Electrochemical Transistor With 3-D-Printed Hollow Microneedle for a Fully Integrated Glucose Sensor
Document Type
Article
Publication Date
3-15-2026
Abstract
In this work, a novel fully integrated glucose sensor based on organic electrochemical transistor (OECT) has been proposed through feasible printing on a flexible substrate. The fully integrated glucose sensor incorporates: 1) a screen-printed OECT featuring poly(3,4- ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT: PSS) channel functionalized with a chitosan–titanium dioxide (CS-TiO2) nanocomposite and glucose oxidase (GOx) enzyme to enable glucose detection; 2) a 3-D-printed 3 × 3 hollow microneedle (HMN) platform with reservoir pad for minimally invasive sampling; and 3) a flexible compact wireless interfacing circuit for glucose analysis. Mechanical and electrical stability are investigated on the OECT device after 100 bending cycles and over a week of testing on a curved surface. With respect to glucose, the OECT showed a strong linear response in between 0.01 and 30 mM (r2 = 0.993), a high sensitivity of 6.01 μA mM−1 cm−2, and good selectivity against ascorbic acid (AA) and uric acid (UA). Upon integration, the integrated glucose sensor achieved a rapid response time of under 20 s when tested on an agar gel-based skin model. The output currents were calibrated and then verified within the glucose range of 1–10 mM, with a total reading time of less than 120 s, demonstrating good accuracy. Overall, the implementation of OECT coupled with HMN offers a promising platform for a fully integrated glucose sensor, with great potential toward commercialization.
Keywords
Capillary force, disposable sensor, enzymatic reaction, flexible substrate, minimally-invasive, stereolithography (SLA)
Publication Title
IEEE Sensors Journal
ISSN
1530-437X
DOI
10.1109/JSEN.2026.3659916
Recommended Citation
Rezali, Fazliyatul Azwa Md; Wan Muhamad Hatta, Sharifah Fatmadiana; Soin, Norhayati; Nouxman, Muhammad Hafizuddin Al Helmy; Bakar, Ahmad Syafiq Aiman A.; Ma, Li Ya; and Sun, Bo, "Screen-Printed Organic Electrochemical Transistor With 3-D-Printed Hollow Microneedle for a Fully Integrated Glucose Sensor" (2026). Research Publications (2026 to 2030). 995.
https://knova.um.edu.my/research_publications_2026_2030/995
Funders
Universiti Malaya
Volume
26
Issue
6
First Page
7989
Last Page
7996
Publisher
Institute of Electrical and Electronics Engineers Inc.