Controlled-atmosphere laser drilling and microvia metallization of aluminum nitride ceramics

Document Type

Article

Publication Date

4-1-2026

Abstract

Aluminum nitride (AlN) ceramics are promising for applications in modern high-density electronic packaging, owing to their high thermal conductivity and electrical insulation. The creation of vertical interconnects in AlN substrates relies on the fabrication and metallization of high-quality through holes. This study investigates the process of drilling microvias in AlN ceramics by using a nanosecond laser under three different atmospheres, followed by electroless copper plating of the inner walls. The influence of the processing environment on the inlet/outlet morphology, sidewall roughness, heat-affected zone, and recast-layer formation is systematically analyzed. Results reveal that microvias fabricated in Ar atmosphere exhibit optimal geometries, with nearly no melt debris or microcracks at the hole edges, thinnest recast layers, and smoothest surfaces, offering ideal substrates for metallization. In contrast, the holes drilled in air and water exhibit noticeable oxidation and contamination. After electroless plating, the coating on Ar-processed microvias displays superior density, uniformity, and strong adhesion to the AlN substrate. This work also demonstrates that employing an inert-gas atmosphere, such as Ar atmosphere, facilitates the fabrication of high-performance metallized through holes in AlN ceramics, thereby enhancing the reliability and integration of advanced electronic packaging.

Keywords

AlN ceramics, Electroless copper plating, Laser drilling, Microvia metallization, Multiatmosphere

Publication Title

Ceramics International

ISSN

0272-8842

DOI

10.1016/j.ceramint.2026.01.331

Funders

Natural Science Foundation of Qingdao Municipality

Volume

52

Issue

9

First Page

11730

Last Page

11745

Publisher

Elsevier Ltd

Share

COinS