Comprehensive optimization of a-Si: H p-i-n structures for enhanced energy harvesting
Document Type
Article
Publication Date
4-1-2026
Abstract
Enhancing the energy conversion efficiency of hydrogenated amorphous silicon (a-Si: H) solar cells remains a key objective in advancing thin-film photovoltaic technology. This study presents a comprehensive numerical optimization of a-Si: H p-i-n solar cells using the OghmaNano simulation platform under standard AM1.5G illumination (100 mW/cm2). The modeling accounts for Shockley–Read–Hall (SRH) recombination, carrier mobility, and field-dependent generation to ensure physical accuracy. The investigation focused on simultaneous optimization of the intrinsic layer thickness (100–600 nm) and bandgap tuning (1.6–1.95 eV) to determine their combined influence on device performance. Results revealed that the trade-off between open-circuit voltage (Voc) and short-circuit current (Jsc) is governed by the balance between enhanced light absorption and increased carrier recombination. An intrinsic layer thickness of 200 nm and bandgap of 1.95 eV yielded the optimal configuration, achieving a simulated efficiency of 11.27%. This value aligns with experimental benchmarks when idealized conditions are considered. The findings confirm that dual-parameter optimization combining geometrical and electronic tuning can substantially improve carrier collection and energy conversion efficiency. Compared with previous studies, the proposed design demonstrates superior performance and provides clear guidelines for the structural engineering of high-efficiency a-Si: H solar cells.
Keywords
Bandgap engineering, Energy conversion efficiency, Layer thickness, Solar cell
Publication Title
Materials for Renewable and Sustainable Energy
ISSN
2194-1459
DOI
10.1007/s40243-025-00342-6
Recommended Citation
Prayogi, Soni and Muhammad, A., "Comprehensive optimization of a-Si: H p-i-n structures for enhanced energy harvesting" (2026). Research Publications (2026 to 2030). 839.
https://knova.um.edu.my/research_publications_2026_2030/839
Volume
15
Issue
1
Publisher
Springer Science and Business Media Deutschland GmbH