Engineering morphology and crystalline structure of nickel silicide nanowires for tunable magnetism and conductivity
Document Type
Article
Publication Date
5-1-2026
Abstract
Balancing magnetism and conductivity remain a critical challenge in the development of nickel silicide nanowires for advanced spintronic and energy applications. Herein, phase-pure nickel silicide nanowires (NWs) were synthesized via chemical vapor deposition (CVD) through a nucleation-limited silicide reaction. The fabrication process involved the thermal evaporation of 220 ± 5 nm-thick Ni films onto c-Si (111) substrates, followed by annealing and H2 plasma treatment to form Ni nanoparticles. Subsequent silicidation was performed at 300–600 °C for 5 min using SiH4/H2 as the silicon source. The morphology, composition, crystal structure, and growth mechanism of the NWs were systematically characterized by FESEM, TEM, XRD, Raman, and XPS. Key magnetoelectric properties were optimized via precise temperature control: the highest remanent magnetization (Br = 2.6× 10−4 emu, 202.97 emu/cm3) was achieved at 380 °C, attributed to reduced grain boundary volume and a high aspect ratio of 800. The maximum saturation magnetization (Ms = 0.0027 emu, 1433.96 emu/cm3, measured at 300 K and 4 K under −60 kOe to 60 kOe) and an ultrahigh electrical conductivity (1.65 ± 0.29 × 106 Ω−1 cm−1) were concurrently obtained at 400 °C, enabled by high NW density (1.489 × 1010 NWs/cm2) and superior phase purity. Finally, the maximum coercivity (Ec = 0.27 kOe) was realized at 500 °C, benefiting from abundant Ni3Si nucleation sites and the mitigation of Si/SiOx-induced performance degradation. These results demonstrate that the magnetoelectric properties of Ni3Si2 NWs are structurally regulated by phase composition and substrate temperature, laying a robust foundation for their application in high-performance spintronics, magnetic sensing, and energy storage devices.
Keywords
Chemical vapor deposition, Coercivity, Conductivity, Nickel silicide nanowires, Remanent magnetization, Saturation magnetization
Publication Title
Materials Science in Semiconductor Processing
ISSN
1369-8001
DOI
10.1016/j.mssp.2026.110430
Recommended Citation
Li, Xiaoxi; Gou, Xianyi; Chanlek, Narong; Yeoh, Keat Hoe; Chang, Yee Hui Robin; Lee, Min Kai; Chang, Lieh Jeng; and Goh, Boon Tong, "Engineering morphology and crystalline structure of nickel silicide nanowires for tunable magnetism and conductivity" (2026). Research Publications (2026 to 2030). 693.
https://knova.um.edu.my/research_publications_2026_2030/693
Volume
206