Thermal and thermoelectric enhancement of hybrid photovoltaic cells incorporating RbScC half-Heusler alloys: A coupled simulation study
Document Type
Article
Publication Date
6-1-2026
Abstract
This work investigates hybrid photovoltaic cells that incorporate the proposed half-Heusler RbScC and CsScC alloys. The material parameters obtained from first-principles calculations are implemented in SCAPS-1D and combined with a dynamic thermal–electrical model to examine how a Heusler interlayer affects both the electronic and thermal behavior of devices. It is found that a 20 nm RbScC layer provides a good compromise between charge transport and heat dissipation. At this thickness, the layer improves band alignment, strengthens the internal electric field and increases the quantum efficiency, while keeping non-radiative recombination at a moderate level. RbScC exhibits a Seebeck coefficient of 245μV K−1, generating a small but systematic thermoelectric voltage of approximately 0.73 mV under operation. This contribution partially compensates (∼12% recovery) the thermally induced open-circuit voltage loss, consistent with the expected negative temperature coefficient of semiconductors (∼ −2 mV K−1). In simulations, the open-circuit voltage decreases slightly from 1.066 V at 300 K to approximately 1.0607 V at thermal steady state (T ≈ 303 K), while the short-circuit current increases marginally and the fill factor remains stable. The efficiency remains close to 10% (a threefold improvement over the reference device), with accumulated degradation staying below 1% over the simulated operating period. Thermal management analysis reveals a modest temperature reduction of approximately 0.5 K between the RbScC configuration and a control case, consistent with the ultrathin nature of the Heusler interlayer. While this difference appears small on the simulated timescale, it could translate into meaningful lifetime extensions over extended operation due to the exponential temperature dependence of degradation processes. Taken together, these results suggest that RbScC can be used as a multifunctional buffer layer, offering optimized electronic transport, systematic thermoelectric compensation, and modest thermal management that collectively enhance both performance and long-term stability in lead-free hybrid solar cells.
Keywords
Half-Heusler alloys, Hybrid photovoltaics, SCAPS simulation, Thermal degradation, Thermoelectric
Publication Title
Solar Energy
ISSN
0038-092X
DOI
10.1016/j.solener.2026.114565
Recommended Citation
Belouatti, I.; Bahlouli, S.; Al-Douri, Y.; Bekhechi, N. E.; Hakamy, A.; Alsalmi, O.; Riane, H.; Hamdache, F.; Belkharroubi, F.; and Sidjilani, F., "Thermal and thermoelectric enhancement of hybrid photovoltaic cells incorporating RbScC half-Heusler alloys: A coupled simulation study" (2026). Research Publications (2026 to 2030). 615.
https://knova.um.edu.my/research_publications_2026_2030/615
Volume
311