Enhancement of photovoltaic (PV) collector performance with passive cooling Y-shaped fins

Document Type

Article

Publication Date

7-1-2026

Abstract

As solar irradiation heats the PV panel, it generates electricity and, as a byproduct, waste heat, raising the operating temperature and effectively reducing PV panel efficiency. Incorporating passive cooling techniques, such as fins, can increase natural convection and reduce operating temperature. The rectangular fin is popular for its efficiency and low cost. However, cooling improvement can be achieved by increasing the fin surface area with an innovative design. This study investigated the use of Y-shaped fins as a passive cooling method to enhance natural convection, thereby improving the management of PV panel operating temperature. This research aims to optimize the fins geometric design through numerical analysis and evaluate their effectiveness through experiments. Results indicated that Y-shaped fins outperform rectangular fins in natural convection. Additionally, the horizontal arrangement of Y-shaped fins dissipated more heat than the vertical setup. To determine the optimal bifurcation angle, 30, 45, 60, and 90 degrees were simulated, with 60 degrees performing best. Experimental results closely matched the simulation outcomes and showed that Y-shaped fins can lower PV panel surface temperatures by up to 3.59 °C, leading to a 5.42% increase in relative electrical efficiency and a 5.49% improvement in maximum power output. Separately, a SAM-based techno-economic analysis found that adding Y-shaped fins adds an additional 4 kWh of energy every year and increases performance by 2.47% compared to the bare panel. Several improvements, such as adding perforations, applying radiative paint, and optimizing fin length and spacing, have been identified to further enhance fin performance.

Keywords

Efficiency enhancement, Natural convection, Passive cooling, Photovoltaic thermal management, Y-shaped fins

Publication Title

Applied Thermal Engineering

ISSN

1359-4311

DOI

10.1016/j.applthermaleng.2026.131170

Volume

299

Share

COinS