A dual optimization strategy of nucleation layer and V/III ratio for defect suppression in a-plane gallium nitride (GaN) on r-plane sapphire

Document Type

Article

Publication Date

8-1-2026

Abstract

The growth of high-quality a-plane gallium nitride (a-plane GaN) remains challenging due to lattice mismatch and defect formation when deposited on r-plane sapphire. In this work, we demonstrate a defect reduction strategy through combined optimization of the nucleation layer (NL) and V/III ratio optimization of the subsequent a-plane GaN during metal organic chemical vapor deposition (MOCVD). By tailoring the NL growth temperature and systematically varying the V/III ratio, we achieved significant improvements in surface morphology and crystalline quality of undoped a-GaN. A low-temperature GaN-NL reduced root-mean-square (RMS) roughness by ∼34% compared with growth without an NL, while X-ray rocking curve (XRC) analysis confirmed reduced mosaicity along both {0001} and {10-10} directions. Further V/III ratio optimization showed that lowering the ratio from 1000 to 200 suppressed pit defects and reduced RMS roughness by ∼79%, with degradation only observed at an excessively low ratio of 100 due to insufficient nitrogen incorporation. The strong correlation between structural, surface morphological and crystallographic analysis demonstrates the effectiveness of this strain-engineering approach. These findings provide a growth window for producing high quality non-polar GaN films, offering valuable insights for advancing GaN-based optoelectronic and power devices.

Keywords

a-plane ud-GaN, GaN nucleation layer, MOCVD, r-plane sapphire, V/III ratio

Publication Title

Materials Science in Semiconductor Processing

ISSN

1369-8001

DOI

10.1016/j.mssp.2026.110649

Volume

210

Share

COinS