Maintaining a 2170 lithium-ion battery’s operating temperature in freezing climates using preheating and an alumina foam PCM structure
Document Type
Article
Publication Date
12-1-2026
Abstract
This study develops a combined preheating and passive cooling strategy to maintain a 2170 lithium-ion battery (LIB) within its optimal operating temperature range of 15–35 °C under freezing conditions. A computational fluid dynamics (CFD) model based on the finite volume method (FVM) is employed to simulate a thermal management structure composed of high-porosity Al₂O₃ foam (ε = 0.9) impregnated with hexadecane as the phase change material (PCM), coupled with an external preheating technique. This work provides a system-level assessment of preheating duration, energy consumption, PCM utilization, and thermal regulation under extreme cold-start conditions down to − 40 °C, demonstrating stable temperature uniformity, effective latent heat absorption, and improved thermal safety for cold-climate battery applications. The results show that the preheating stage effectively raises the cell temperature to 15 °C, while the PCM–Al₂O₃ foam matrix maintains the temperature below 35 °C during discharge. Across all operating conditions, both the average temperature (Tavg) and maximum temperature (Tmax) increase with C-rate and environmental temperature. At low C-rates (1–2 C), the available PCM capacity is sufficient to maintain Tavg = 20 °C and keep Tmax near this level until the end of discharge, whereas at higher C-rates (3–4 C), Tavg and Tmax rise above 20 °C once the PCM approaches complete melting.
Keywords
2170 LIB, Al₂O₃ foam, CFD, PCM, Preheating, Thermal management
Publication Title
Scientific Reports
ISSN
2045-2322
DOI
10.1038/s41598-026-40953-1
Recommended Citation
Alkhatib, Omar J.; Ali, Ali B.M.; Tursunzoda, Farzona; Singh, Pradeep Kumar; Hussien, Shimaa A.; Ayed, Hamdi; Dahari, Mahidzal; and Mahariq, Ibrahim, "Maintaining a 2170 lithium-ion battery’s operating temperature in freezing climates using preheating and an alumina foam PCM structure" (2026). Research Publications (2026 to 2030). 475.
https://knova.um.edu.my/research_publications_2026_2030/475
Volume
16
Issue
1