Effect of Kenaf Fiber Loading on the Mechanical and Physical Properties of Bio-Epoxy Composites
Document Type
Article
Publication Date
1-1-2026
Abstract
Research on sustainable materials has increased in the past decade. This study focuses on investigating the effect of different fiber loading on the physical and mechanical properties of kenaf/bio-epoxy by varying the fiber loading, which is 30, 40, 50, and 60 wt%. The density, water absorption, and thickness swelling of the composite increases as fiber loading increases. The composites were prepared in good condition, where the void content was reported below 4%. In addition, increasing the fiber loading of the samples enhanced their impact strength significantly compared to neat bio-epoxy. However, the tensile and flexural properties of the samples studied did not show a positive enhancement. Scanning Electron Microscopy (SEM) revealed that the kenaf–epoxy composites exhibited high fiber dispersion, greater fiber-matrix wettability, and fiber debonding, which can be used to explain the finding on the mechanical properties. It can be concluded from this research that kenaf/bio-epoxy composites (K-60) have the best overall impact strength compared to other composites.
Keywords
bio-epoxy, Biocomposites, flexural properties, kenaf fiber, physical properties, tensile properties
Publication Title
Journal of Natural Fibers
ISSN
1544-0478
DOI
10.1080/15440478.2026.2631141
Recommended Citation
Odesanya, Kazeem Olabisi; Jawaid, Mohammad; Ismail, Ahmad Safwan; Alothman, Othman Y.; Dhakal, Hom Nath; and Abu-Jdayil, Basim, "Effect of Kenaf Fiber Loading on the Mechanical and Physical Properties of Bio-Epoxy Composites" (2026). Research Publications (2026 to 2030). 2054.
https://knova.um.edu.my/research_publications_2026_2030/2054
Volume
23
Issue
1
Publisher
Taylor and Francis