Tailoring Microstructure and Performance of Cu/SiC Composites via Integrated Powder Metallurgy and Thermo-Compression Processing
Document Type
Article
Publication Date
1-1-2026
Abstract
This study reports the fabrication and characterization of copper–silicon carbide (Cu–SiC) metal matrix composites produced using powder metallurgy (PM) combined with thermo-compression processing (TCP), a dual route that remains limited in Cu–SiC research. Micro-sized SiC particles (1–25 wt.%) were incorporated into Cu, compacted, sintered, and subsequently subjected to sequential forging and annealing. Unlike conventional PM-only processing, TCP significantly reduced porosity, promoted more uniform reinforcement dispersion, and relieved residual stresses, creating a strong synergy between densification and microstructural refinement. SEM, EDS, XRD, and Raman analyses confirmed phase stability, homogeneous reinforcement distribution, and the absence of deleterious interfacial phases. The integrated PM + TCP route achieved an ultimate tensile strength of ~209 MPa, hardness of ~65 HRB, and toughness of ~35 MJ/m3 at approximately 3 wt.% SiC. The superior performance at this composition resulted not from the lowest porosity but from the combined effects of uniform particle dispersion, improved particle–matrix bonding, and deformation-driven refinement. These findings establish TCP as an effective post-sintering strategy that overcomes intrinsic porosity and interfacial limitations in Cu–SiC composites. Overall, powder metallurgy combined with the thermo-compression processing is identified as a promising processing pathway for developing high-strength, thermally stable Cu–SiC materials for structural and thermal management applications.
Keywords
Cu–SiC composites, grain refinement, microstructure characterization, porosity reduction, thermo-compression processing
Publication Title
Materials
ISSN
1996-1944
DOI
10.3390/ma19020243
Recommended Citation
Shan, Mohammad; Arif, Sajjad; Khairi Faiz, Muhammad; Muhamad, Mohd Ridha; Alzahrani, Ateyah; Alghamdi, Ahmad; and Khan, Anwar Ulla, "Tailoring Microstructure and Performance of Cu/SiC Composites via Integrated Powder Metallurgy and Thermo-Compression Processing" (2026). Research Publications (2026 to 2030). 2006.
https://knova.um.edu.my/research_publications_2026_2030/2006
Volume
19
Issue
2
Publisher
Multidisciplinary Digital Publishing Institute (MDPI)