Passive mode-locked Tm–Ho Co-doped fiber lasers with polymer-coated CdTe saturable absorber on arc-shaped fiber
Document Type
Article
Publication Date
1-1-2026
Abstract
This work demonstrates mode-locked pulses obtained using a polymer-coated cadmium telluride (CdTe) saturable absorber (SA). The arc-shaped fiber was fabricated using a two-step wheel-polishing process, and CdTe SA was drop-casted onto it. Then, it was overcoated with an ultraviolet (UV) cured polymer. This method enhances the fiber’s durability and protects the CdTe SA from air, dust and moisture. The fabricated SA has a saturation intensity of 11.2MW/cm2 and a modulation depth of 19.8%. A stable mode-locked optical spectrum with a center wavelength of 1909.6nm, 3dB bandwidth of 2.9nm, and pulse width of 1.32ps was obtained at a threshold pump power of 398mW. The mode-locked laser has a relatively high signal-noise ratio (SNR) of 64.9dB. Hence, this simple polymer-coating technique enables the application of other volatile compounds as SA for future investigation.
Keywords
cadmium telluride, Mode-locking, polymer-coated, thulium/holmium doped fiber laser
Publication Title
Journal of Nonlinear Optical Physics and Materials
ISSN
02188635
DOI
10.1142/S0218863526500104
Recommended Citation
Ahmad, H.; Rusni, N. A.M.; and Samion, M. Z., "Passive mode-locked Tm–Ho Co-doped fiber lasers with polymer-coated CdTe saturable absorber on arc-shaped fiber" (2026). Research Publications (2026 to 2030). 1765.
https://knova.um.edu.my/research_publications_2026_2030/1765