Maximizing energy efficiency and drying quality in PVT-PCM solar dryers through multi-objective optimization and nocturnal heat release analysis
Document Type
Article
Publication Date
1-1-2026
Abstract
Conventional solar dryers often face efficiency losses and interruptions once solar radiation declines, limiting their reliability for agricultural applications. This study investigates a ribbed photovoltaic thermal (PVT) solar dryer integrated with phase change materials (PCMs) to address these shortcomings by enabling nocturnal heat release and consistent drying conditions. Unlike earlier works that mainly considered daytime PCM performance, this research applies an enthalpy-based transient model to capture dynamic PCM behavior and incorporates product moisture reduction directly into the optimization objectives. The model was validated against experimental data, then multi-objective optimization using NSGA-II was performed to balance electrical efficiency, thermal efficiency, and moisture reduction. Both organic PCMs and mineral salts were examined, showing complementary strengths: organic PCMs enhanced nocturnal heat release and stable drying, while mineral salts achieved higher thermal efficiencies and faster payback. Results showed that PCM integration reduced PV temperature from 68.4 °C to 55 °C, raised thermal efficiency to 52.99 %, and improved drying performance, with optimization predicting minimum product moisture of 1.2847 kg/kg dry basis after one day. Over the full drying period, moisture content declined to 0.216 dry basis with PCMs, compared with 0.337 without PCM. Economic analysis indicated payback periods as short as 0.21 years, while environmental assessment projected up to 17.99 tonnes of avoided CO2 emissions over 25 years. By capturing dynamic PCM behavior and optimizing both energy and drying quality, this study demonstrates a pathway toward more reliable, efficient, and sustainable solar drying technologies for large-scale agricultural use.
Keywords
Moisture content reduction, Multi-objective optimization, Nocturnal heat release, Phase change material, Photovoltaic thermal, Solar dryer
Publication Title
Applied Thermal Engineering
ISSN
13594311
DOI
10.1016/j.applthermaleng.2025.128774
Recommended Citation
Chouchane, Hammam; Mekhilef, Saad; Mubin, Marizan; and Tey, Kok Soon, "Maximizing energy efficiency and drying quality in PVT-PCM solar dryers through multi-objective optimization and nocturnal heat release analysis" (2026). Research Publications (2026 to 2030). 1648.
https://knova.um.edu.my/research_publications_2026_2030/1648
Volume
282