Comparative In-vitro Analysis of Fracture Strength in 3D-printed VarseoSmile TriniQ Resin Versus Milled Monolithic Zirconia Endocrowns: Advancing Restorative Material Performance
Document Type
Article
Publication Date
1-1-2026
Abstract
Introduction: Restoring endodontically treated teeth requires materials that balance mechanical strength and tooth preservation. Endocrowns provide a conservative approach compared to conventional post-and-core restorations. While monolithic zirconia is widely used for its superior fracture resistance, novel 3D-printed materials like VarseoSmile TriniQ offer potential advantages in digital workflows and restorability. This study compares the fracture resistance and failure patterns of monolithic zirconia and VarseoSmile TriniQ endocrowns to evaluate their suitability for clinical application. Methods: Eighteen extracted human molars were randomly assigned to two groups (n = 9 per group). Standardized endodontic treatment was performed, followed by endocrown preparation. Monolithic zirconia endocrowns were milled using CAD/CAM technology, while VarseoSmile TriniQ endocrowns were fabricated using high-precision 3D printing. All restorations were cemented with dual-cure resin cement. Fracture resistance was tested using a universal testing machine, applying a compressive load until failure. Failure patterns were classified as favorable, unfavorable simple, or unfavorable complex based on whether fractures were confined to the restoration, extended into the tooth structure, or severely compromised both. Data were analyzed using the Mann–Whitney U test to determine statistical significance. Results: Zirconia endocrowns exhibited significantly higher fracture resistance (median = 3746.70 N, IQR = 1362.32 N) compared to VarseoSmile TriniQ (median = 1114.73 N, IQR = 180.66 N) (P < 0.001). Fracture patterns varied: 67% of zirconia failures were complex or destructive, compromising the natural tooth structure, whereas 60% of VarseoSmile TriniQ fractures remained confined to the restoration, sparing the tooth structure. Conclusion: Monolithic zirconia endocrowns demonstrate superior fracture resistance, making them ideal for high-load-bearing applications. However, VarseoSmile TriniQ offers a more favorable failure pattern, reducing the risk of catastrophic tooth damage. These findings suggest that while zirconia remains the preferred choice for durability, 3D-printed materials like VarseoSmile TriniQ could serve as viable alternatives in cases, prioritizing tooth preservation and digital efficiency.
Keywords
3D printing, digital dentistry, endocrown, in-vitro study, VarseoSmile TriniQ
Publication Title
Dubai Medical Journal
DOI
10.18502/dmj.v9iS1.21022
Recommended Citation
Mahmoud, Okba; Buzayan, Muaiyed Mahmoud; Munusamy, Selva Malar; Elkezza, Aeman H.H.; and Sulaiman, Eshamsul, "Comparative In-vitro Analysis of Fracture Strength in 3D-printed VarseoSmile TriniQ Resin Versus Milled Monolithic Zirconia Endocrowns: Advancing Restorative Material Performance" (2026). Research Publications (2026 to 2030). 1617.
https://knova.um.edu.my/research_publications_2026_2030/1617
Volume
9
First Page
5
Last Page
17