High fidelity numerical modeling of thermal behavior in laser powder bed fusion (LPBF) of AlSi10Mg and Ti6Al4V: accelerated prediction and process optimization

Document Type

Article

Publication Date

2-1-2026

Abstract

In Additive Manufacturing (AM), optimizing process parameters-like laser power and scanning speed are essential for controlling temperature distribution and melt-pool size. To efficiently guide process parameter selection in Laser Powder Bed Fusion (LPBF), this study develops and validates an accelerated numerical model for AlSi10Mg and Ti6Al4V, focusing on predicting thermal behavior and melt pool morphology. The model analyzes a comprehensive range of laser powers (100–400 W) and scanning speeds (500–1500 mm/s), employing a full factorial design of experiments to investigate their influence on temperature evolution, melt pool width, and melt pool depth. Results demonstrate a stronger correlation between laser power and peak temperatures, with increased power leading to higher thermal gradients and larger melt pools. Conversely, higher scanning speeds diminish peak temperatures and produce narrower, shallower melt pools due to reduced laser-material interaction time. The study identifies a laser power of 100 W combined with a scanning speed of 500 mm/s as optimal for both AlSi10Mg and Ti6Al4V. This parameter combination achieves a balance between sufficient energy input for proper melting and minimized heat accumulation, mitigating potential defects like porosity and residual stresses. The developed model provides a computationally efficient approach to pre-screen process parameters, significantly reducing the time and resources required for optimization compared to traditional experimental methods. This accelerated approach allows for rapid exploration of the parameter space and informs subsequent, more detailed Multiphysics simulations. By efficiently predicting thermal behavior, this model contributes to faster development cycles, improved part quality, and reduced material waste in additive manufacturing. The study’s findings are extendable to other materials and AM processes, promoting innovation and scalability within the field. Ultimately, this work advances LPBF technology by providing a robust and efficient framework for thermal analysis.

Keywords

AlSi10Mg, Flat surface assumption, Laser powder bed fusion (LPBF), Laser power, Melt pool, Process optimization, Scanning speed, Thermal behavior, Ti6Al4V

Publication Title

International Journal of Advanced Manufacturing Technology

ISSN

0268-3768

DOI

10.1007/s00170-025-16849-1

Volume

142

Issue

7-8

First Page

3307

Last Page

3336

Publisher

Springer Science and Business Media Deutschland GmbH

Share

COinS