PMMA-LiTFSI based gel polymer electrolyte for lithium-oxygen cell application
Document Type
Article
Publication Date
10-1-2021
Abstract
In this work, poly (methyl methacrylate), PMMA based gel polymer electrolytes (GPEs) have been studied. Lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) was selected as lithium-ion donor and tetraethylene glycol dimethyl ether (TEGDME) as a solvent. The highest conducting sample was obtained at 25 wt% LiTFSI with ionic conductivity value of 2.80 mS cm-1. The dielectric constant of GPEs sample follows the conductivity trend. The percentage of free ions is observed to increase up to electrolyte containing 25 wt% LiTFSI salt. Beyond that, the free ions percentage decreased. Lithium-ion transference number for the highest conducting sample is 0.47. The highest ionic conducting sample show good electrode-electrolyte interfacial stability and is suggested suitable in lithium-oxygen batteries. The charge and discharge capacities in the first cycle were 0.87 and 1.23 mAh cm-2, respectively. Formation of Li2O2 can be observed by XRD pattern of the air cathode during the discharge.
Keywords
Ionic conductivity, Fourier transform infrared (FTIR) spectroscopy, Lithium transference number, Lithium-oxygen cell
Divisions
PHYSICS
Funders
PPP (PG011-2013B),High Impact Research Grant (J-00000-73555)
Publication Title
Optical Materials
Volume
120
Publisher
Elsevier
Publisher Location
RADARWEG 29, 1043 NX AMSTERDAM, NETHERLANDS