Two-phase frictional pressure drop with pure refrigerants in vertical mini/micro-channels
Document Type
Article
Publication Date
2-1-2021
Abstract
Environmental concerns have urged a search for eco-friendly refrigerants in the refrigeration industry to overcome ozone depletion and global warming problems. Therefore, current research emphasizes frictional pressure drop during flow boiling of environment-friendly refrigerants (GWP<150), isobutane, HFC-152a, HFO-1234yf were tested against commonly reported HFC-134a. The data presented here was collected under heat flux-controlled conditions; the test piece was a round tube (1.60 mm diameter). The data collection was performed at 27 and 32 degrees C with mass velocities in 50-500 kg/m(2)s range. Effects of critical controlling parameters, like heat flux, mass velocity, exit vapor quality, operating pressure and medium, were studied in detail. It was observed that pressure drop increases along with mass velocity increment in the test piece and increases with exit vapor quality increment. The same was noticed to decrease with saturation temperature increment. Parametric effects and prediction of assessment methods are reported.
Keywords
Natural refrigerants, Pressure drop, Vapor quality, Heat flux, Correlation
Funders
Deanship of Scientific Research at King Khalid University[R.G.P 2/105/41]
Publication Title
Case Studies in Thermal Engineering
Volume
23
Publisher
Elsevier
Publisher Location
RADARWEG 29, 1043 NX AMSTERDAM, NETHERLANDS