Manufacturing of high-strength lightweight aggregate concrete using blended coarse lightweight aggregates
Document Type
Article
Publication Date
1-1-2017
Abstract
Structural lightweight concrete plays an important role in the construction industry, especially for the high-rise buildings. It can only be produced using lightweight aggregates. Oil-palm-boiler clinker (OPBC) is a solid waste from the oil palm industry and could be used as lightweight aggregate in concrete mixture. However, the density of this lightweight aggregate is more than the density of the other types of natural and artificial lightweight aggregate. Therefore, the density of concrete was made of this lightweight aggregate is relatively high and is in the range of semi-lightweight concrete. In the current study, OPBC was partially substituted with a lighter lightweight aggregate namely oil palm shell (OPS) in a OPBC semi-lightweight concrete with high strength to further reduce the density of the concrete. To this end, OPBC was replaced by OPS with 0%, 20%, 40% and 60% by volume. Test results show that contribution of OPS in OPBC concrete reduces the density, while all the mechanical properties were also reduced. This occurs due to smooth surface texture of OPC and its lower density compared to OPBC. It was, however, found that OPBC semi-lightweight concrete containing more than 20% OPS turns to be structural lightweight concrete with high strength. Based on the mechanical properties and water absorption test results it is recommended that the optimum substitution of OPBC with OPS stays between 20 to 40%.
Keywords
Semi-lightweight aggregate concrete, High strength lightweight concrete, Oil-palm-boiler clinker, Mechanical properties, Stress-strain relationship
Divisions
fac_eng,BuiltEnvironment
Funders
University Malaya Research Fund Assistance (BKP), Grant No. BK020-2016
Publication Title
Journal of Building Engineering
Volume
13
Publisher
Elsevier