Production of fructose using recycle fixed-bed reactor and batch bioreactor

Document Type

Article

Publication Date

1-1-2012

Abstract

Successful development of fructose syrup products lies in high yielding glucose-isomerizing enzymes and production reactor. This work focused on determining the optimum operating conditions for batch reactor by an overall desirability function, D, and evaluation of the performance of fructose production using three different types of reactors. Production of fructose from glucose isomerisation process using commercial immobilized glucose isomerase (IGI) was conducted in two bioreactors, a batch type of stirred tank bioreactor and in a continuous mode of column bioreactor. Initial concentration of glucose in the substrate used was 30 w/v with 6 g of dry immobilized glucose isomerase (IGI). The recycle system showed 50 enhancement in production as the operating conditions, temperature, feed flow rate and pH were conscientiously monitored and compared. The percentage isomerisation for batch reactor was much higher than the fixed-bed reactor recycling system by 81.64 at pH values of 8. The optimum operating conditions for both systems with substrate flow rates of 8 ml min -1 were at 65°C and pH value of 8.

Keywords

Fixed-bed reactor and recycle system, Fructose, Glucose isomerisation, Immobilized glucose isomerase (IGI), glucose, glucose isomerase, article, batch reactor, continuous flow reactor, fixed bed reactor, flow rate, intermethod comparison, isomerization, pH, recycled fixed bed reactor, stirred reactor, temperature.

Divisions

fac_eng

Publication Title

Journal of Food Agriculture & Environment

Volume

10

Issue

2

Publisher

Journal of Food Agriculture & Environment

Additional Information

Part 1 946FC Times Cited:0 Cited References Count:22

This document is currently not available here.

Share

COinS