Surface properties and activation energy of superplastically carburized duplex stainless steel
Document Type
Article
Publication Date
1-1-2010
Abstract
A new surface carburizing technique which combines superplastic phenomenon and carburizing process called superplastic carburizing (SPC) was introduced and compared with conventional carburizing (CC) process. Thermomechanically treated duplex stainless steel (DSS) with a fine grain microstructure that exhibits superplasticity was used as the superplastic material. SPC was carried out at temperatures of 1198-1248 K and a compression rate of 1 x 10(-4) s(-1) for various durations. Metallographic studies revealed that a carbon layer with a uniform, dense and smooth morphology formed on all carburized specimens. The case depth of the carbon layer was between 50.8 and 159.1 mu m. A remarkable increase in surface hardness was observed in the range 389.9-1129.0 HV. Activation energy for SPC was determined as 183.4 kJ mol(-1), which is lower compare to CC process. The results indicate that SPC accelerates the diffusion of carbon atoms into the surface of DSS, thus increasing the thickness of the carburized layer and the surface hardness, at lower activation energy. (C) 2010 Elsevier B.V. All rights reserved.
Keywords
Superplastic carburizing, Compression, Activation energy
Publication Title
Materials Chemistry and Physics
Volume
122
Issue
2-3
Publisher
Elsevier
Publisher Location
PO BOX 564, 1001 LAUSANNE, SWITZERLAND