Gain clamping in single-pass and double-pass L-band erbium-doped fiber amplifiers
Document Type
Article
Publication Date
1-1-2004
Abstract
Gain clamping is demonstrated in single-pass and double-pass long wavelength band erbium-doped fiber amplifiers (L-band EDFAs). A C/L-band wavelength division multiplexing (WDM) coupler is used in single-pass system to generate a laser at 1566 nm. The gain for the amplifier is clamped at 15.5 dB with gain variation of less than 0.2 dB from input signal power of -40 to -14 dBm with almost negligible noise figure penalty. However, the flatness of gain spectrum is slightly degraded due to the un-optimisation of erbium-doped fiber (EDF) length. The advantage of this configuration is that the oscillating light does not appear at the output port of the amplifier. A highly efficient gain-clamped L-band EDFA with improved noise figure characteristic is demonstrated by simply adding a broadband conventional band fiber Bragg grating (C-band FBG) in double pass system. The combination of the FBG and optical circulator has created laser in the cavity for gain clamping. By adjusting the power combination of pumps 1 and 2, the clamped gain level can be controlled. The amplifier gain is clamped at 28.1 dB from -40 to -25 dBm with gain variation of less than 0.5 dB by setting the pumps 1 and 2 at 59.5 and 50.6 mW, respectively. The gain is also flat from 1574 nm to 1604 nm with gain variation of less than 3 dB. The corresponding noise figure varies from 5.6 to 7.6 dB, which is 0.8 to 2.6 dB reduced compared to those of unclamped amplifier.
Keywords
Gain clamping, Single-pass, Double-pass, L-band erbium-doped fiber amplifiers
Divisions
fac_eng,PHYSICS
Publication Title
Acta Physica Slovaca
Volume
54
Issue
1
Publisher
De Gruyter Open